Minerva Midi Kit

Der Roland Juno 60 ist mit Sicherheit einer der beliebtesten mehrstimmigen Analogsynthesizer überhaupt. Zurecht, bietet doch kaum ein Gerät einen derart tiefen Klang im Verhältnis zum noch relativ moderaten Preis. Leider kommt der Synthesizer aus einer Zeit, bevor MIDI sich durchgesetzt hatte und verfügt deswegen nur über die Roland-eigene DCB-Schnittstelle. Die dazugehörigen Boxen, die Roland damals verkauft hat, sind mittlerweile viel zu teuer und selten geworden. Außerdem, wie schick wäre eine interne Lösung? Laszlo von Midipolis schafft Abhilfe mit dem Minerva MIDI Kit:

Minerva is a MIDI retrofit for the Roland Juno 60 synthesizer. It is installed internally but with a minimum harm to the original system hence can be called non-destructive.
The Minerva main board which sits in an add-socket actually replaces one of the factory Roland microprocessor without the needing of removing the processor itself. By unplugging the add-on board the original processor is back to work.
The MIDI sockets are prepared on a plate which is installed as a replacement of the DCB socket plate.
The Minerva pitch bend board is to be plugged at the pitch bend board of the Juno. This little board mixes the manual and MIDI pitch bend signals.
While Minerva adds superior MIDI functions to Juno it also provides fine extras for sound manipulation, too. An extra very flexible LFO and an extra mono envelope generator for the filter extends modulation capabilities. Both the extra LFO and the arpeggiator can be synced to MIDI. The voice generation and the tonal character of the synthesizer are not affected by adding Minerva.
The memory capacity is enlarged to 80 patches from the original 56 and the extra parameters are stored in the patch memory as well.
The firmware can be upgraded via MIDI and the patches can up- and downloadable as SysEx data.

Ich habe das Kit selbst in meinen Juno eingebaut und es funktioniert einfach fantastisch! Durch die neuen Modulationsmölichkeiten lassen sich völlig neue, frische Klänge erstellen und die MIDI-Implementation läuft hervorragend. Laszlo gab mir Elektrorookie freundlicherweise per Chat noch Hinweise beim Einbau, der nicht für Lötunkundige ist. Mein Vorschlag an alle Juno-Besitzer, die den Einbau scheuen: kauft das Kit und lasst unseren Synthtech Arne den Einbau erledigen. Dann seid ihr schnell und sorgenfrei im Besitz eines mächtig aufgebohrten Synthesizerklassikers!

Osterzeit, Synthesizerzeit!
DasDAS